Excedo Services Page, RIBS,Inflatable boat sales & repair, Zodiac,Excedo Canada, Amphibian,Rigid Inflatable Boats,Factory Direct RIBS, Discount RIBS, Custom RIBS, Custom Inflatable Boats

Inflatable boat repairs....we repair all makes and models...from tubes to fiberglass we do it all.

Hypalon or PVC bring in your inflatable or RIB for a quotation today.

You can ship your inflatable to us and we will repair it and ship back anywhere in Canada or the.

See our brochure on Inflatable Repairs for more details.

We sell Hypalon and PVC Repair kits for all makes of Inflatables.

Call or E-mail for prices and same day shipping.

Excedo is the authorized Inflatable Service, Repair and Warranty Center for Mercury & Quicksilver Inflatables and also for AB Inflatables. We carry a complete line of parts and accessories.

Quicksilver boat inflatables logo

/upload/images/rescue boat 465.jpg

This RIB is a Fire & Rescue boat. We have built or customized several RIBS like this for different Fire Departments.

Rigging.... Excedo is an authorized Suzuki Marine OEM, we can rig your RIBS with Suzuki parts and motors. We also have partnerships with several boat dealers which allow us to rig your boats with a choice of different brands of outboards. Baetech Marine Electronic Services can assist you with any marine electronics or instruments you require. Please contact us for details or complete the form in the Feedback section.

Inflatable Boat - Maintenance and Repairs

The buoyancy tube of your inflatable boat is made of fabric using plastomer PVC or neoprene/hypalon rubber. Maintenance is easy but essential.

Clean it every month: (if used extensively) but recommended seasonally before storing for the winter.

NEVER USE STRONG DETERGENTS (ACID, TRICHLORETHYLENE, MINERAL SPIRIT) OR SILICONE-BASED PRODUCTS TO CLEAN YOUR BOAT.

Inflate the buoyancy tube

Open the self bailer and wash the boat with a hose to remove sand and other particles

Remove the floor or floorboards where applicable

Clean all grime, stains, etc (use products from your dealer if required)

Check all inflatable sections for leaks, with foamy soap and water

Rinse with fresh water and dry thoroughly

NEVER USE HIGH PRESSURE CLEANING EQUIPMENT. THIS MAY CAUSE DAMAGE TO THE BOAT

When deflating

	Check that the valves and gaskets are clean and not damaged
	Check to ensure the self bailer is not clogged

DROP IN PRESSURE:
A 20% air pressure loss in a 24 hours period is normal.

Only address more serious air leakages:
ie: .25 PSI in 5 hours

If you have a problem with an air leakage:
first, check all valves are intact and in closed position (nothing clogging the valve).

Do not hesitate to contact your Dealer.

Storage
When storing your boat, keep it in a clean and dry place that is not affected from major variations in temperature and other damaging environmental factors. You may store the boat deflated and rolled up or lightly inflated. If you own an inflatable with a removable tubeset, take it off for easier, more thorough cleaning. You may store the tubeset on or off the boat.

RODENTS CHEW ON FABRIC INCLUDING INFLATABLE BOAT MATERIAL. STORE AWAY FROM

RATS AND MICE).